Scanners

A device that can read text or illustrations printed on paper and translate the information into a form the computer can use. A scanner works by digitizing an image -- dividing it into a grid of boxes and representing each box with either a zero or a one, depending on whether the box is filled in. (For color and gray scaling, the same principle applies, but each box is then represented by up to 24 bits.) The resulting matrix of bits, called a bit map, can then be stored in a file, displayed on a screen, and manipulated by programs.

Optical scanners do not distinguish text from illustrations; they represent all images as bit maps. Therefore, you cannot directly edit text that has been scanned. To edit text read by an optical scanner, you need an optical character recognition (OCR) system to translate the image into ASCII characters. Most optical scanners sold today come with OCR packages.

Scanners typically read red-green-blue color (RGB) data from the array. This data is then processed with some proprietary algorithm to correct for different exposure conditions, and sent to the computer via the device's input/output interface (usually SCSI or bidirectional parallel port in machines pre-dating the USB standard). Color depth varies depending on the scanning array characteristics, but is usually at least 24 bits. High quality models have 48 bits or more color depth. The other qualifying parameter for a scanner is its resolution, measured in pixels per inch (ppi), sometimes more accurately referred to as Samples per inch (spi). Instead of using the scanner's true optical resolution, the only meaningful parameter, manufacturers like to refer to the interpolated resolution, which is much higher thanks to software interpolation. As of 2004, a good flatbed scanner has an optical resolution of 1600–3200 ppi, high-end flatbed scanners can scan up to 5400 ppi, and a good drum scanner has an optical resolution of 8000–14,000 ppi. Manufacturers often claim interpolated resolutions as high as 19,200 ppi; but such numbers carry little meaningful value, because the number of possible interpolated pixels is unlimited.

The size of the file created increases with the square of the resolution; doubling the resolution quadruples the file size. A resolution must be chosen that is within the capabilities of the equipment, preserves sufficient detail, and does not produce a file of excessive size. The file size can be reduced for a given resolution by using "lossy" compression methods such as JPEG, at some cost in quality. If the best possible quality is required lossless compression should be used; reduced-quality files of smaller size can be produced from such an image when required (e.g., image designed to be printed on a full page, and a much smaller file to be displayed as part of a fast-loading web page).

The third important parameter for a scanner is its density range. A high density range means that the scanner is able to reproduce shadow details and brightness details in one scan. By combining full-color imagery with 3D models, modern hand-held scanners are able to completely reproduce objects electronically. The addition of 3D color printers enables accurate miniaturization of these objects, with applications across many industries and professions.